Endress+Hauser Vibronic Point level detection Soli

Endress+Hauser Vibronic Point level detection Soliphant FTM50-AGG2A2A12AA

Specs at a glance
Process temperature
-50°C ... 280°C
(-60°F ... 540°F)

Process pressure / max. overpressure limit
Vacuum ... 25 bar
(Vacuum ... 360 psi)

Min. density of medium
Standard fork: 10 g/l
Short fork: 50 g/l

Field of application
Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.

Point level switch for fine grained solids and powder.

Process connections: Threads, flanges and hygienic connection (Tri-Clamp)

Temperature: -50 to +280°C (-60 to +540°F)

Pressure: -1 to +25bar (-14.5 to +360psi)

Sensor length: 145mm, 200mm

Sensor material: 316L (3,2µm, 0,8µm, PTFE coated, ETFE coated)

International explosion protection certificates

Benefits
SIL2 in accordance with IEC 61508

No mechanically moved parts, free of maintenance

Measurement not affected by build-up or external vibration

Various electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control system

Build-up and abrasion display selectable, density setting and switching delay selectable

Choice of coated or polished sensor

Build-up and corrosion detection

Measuring principle
Vibration Solids

Characteristic / Application
Compact point level switch for fine grained solids and powder
Grain size <= 10 mm (<= 0.39 in)
Fork sensor
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside

Specialities
Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2

Supply / Communication
10-55V DC PNP 3-wire
19-253V AC 2-wire
19...253V AC / 19V...55V DC 2 relay contact
8/16mA
NAMUR
PFM

Ambient temperature
-50°C ... 70°C
(-60°F ... 160 °F)

Process temperature
-50°C ... 280°C
(-60°F ... 540°F)

Process pressure / max. overpressure limit
Vacuum ... 25 bar
(Vacuum ... 360 psi)

Min. density of medium
Standard fork: 10 g/l
Short fork: 50 g/l

Main wetted parts
selectable:
316L 3,2um
316L 0,8um
316L PTFE coated (to avoid build-up)
316L ETFE coated (to avoid corrosion)

Process connection
Thread
R 1 1/2"
1 1/4" NPT
1 1/2" NPT
EN Flange DN50...DN100
ASME Flange 2"...4"
JIS Flange 50A...100A

Process connection hygienic
Tri-Clamp ISO2852

Sensor length
Standard: 200mm (8")
Short: 145mm (5.7")

Communication
DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM